Does hot wire go on top or bottom of switch?

As we learned on the Basic Wiring Terminology page, black wires are hot. These sons have the power. Connect the source wire to the bottom terminal of the switch and the other black wire to the top terminal.

Does the hot wire go up or down on the light switch?

As we learned on the Basic Wiring Terminology page, black wires are hot. These sons have the power. Connect the source wire to the bottom terminal of the switch and the other black wire to the top terminal.

Which side of a switch does the hot wire go to?

The black (hot) wire goes to the brass screw or hole on the back of the unit on the same side as the brass screw. This wire is sometimes red. The green or bare copper (ground) wire, if the unit has one, connects to the green screw terminal on the switch or control box.

Does the hot wire go to the switch?

The black wire is the hot wire that carries current from the circuit breaker panel to the switch or light source. The white wire is the neutral wire, which takes unused electricity and power and returns it to the breaker panel.

Does the hot wire go to the load or the line?

The circuit’s hot wire (usually black or red in color) connects to the black or brass-colored screw terminal block marked LINE. The white neutral wire connects to the silver screw terminal labeled LINE. Dash and load markings are usually printed on the back of the socket’s plastic body.

Does the hot wire run up or down a switch?

As we learned on the Basic Wiring Terminology page, black wires are hot. These sons have the power. Connect the source wire to the bottom terminal of the switch and the other black wire to the top terminal.

Where does the hot wire go on a switch?

The black (hot) wire goes to the brass screw or hole on the back of the unit on the same side as the brass screw. This wire is sometimes red. The green or bare copper (ground) wire, if the unit has one, connects to the green screw terminal on the switch or control box.

Does the black wire go up or down to the light switch?

Hook the stripped wire to the box and switch. Hook the black wire to the bottom clip of the switch. Hook the white wire to the top clip of the switch. Slide the switch into the box and secure with screws at the top and bottom.

Does the hot wire go to the switch?

The black wire is the hot wire that carries current from the circuit breaker panel to the switch or light source. The white wire is the neutral wire, which takes unused electricity and power and returns it to the breaker panel.

Does the hot wire go to the light switch?

The power wire (the hot wire from the service panel) goes to the switch before it goes to the light fixture. Two wires enter the switch box: one powers the light fixture and the other goes to the light fixture. The neutral wires are spliced ​​and a black wire is connected to each switch terminal. 23

Does the hot wire go up or down on the switch?

As we learned on the Basic Wiring Terminology page, black wires are hot. These sons have the power. Connect the source wire to the bottom terminal of the switch and the other black wire to the top terminal.

Where does the hot wire on the switch go?

The black (hot) wire goes to the brass screw or hole on the back of the unit on the same side as the brass screw. This wire is sometimes red. The green or bare copper (ground) wire, if the unit has one, connects to the green screw terminal on the switch or control box.

Does it matter which wire goes where on a switch?

If it’s a single pole, two terminal switch, the answer is no. One wire is power to the switch and the other wire goes to the light.